Kasco 2400 Replacement Motor 1/2HP 115v

Description

Kasco Model 2400 (1/2 HP) replacement motor with propeller and cord

Save $$ by only ordering only what you need to get your Kasco powered equipment running again. Fountain floats, mounting accessories, power control panels and power cords (if they have quick disconnects installed) can all be reused if you replace your Kasco motor. ?

These motors are Brand New ?direct from the Kasco factory and can ?be used as a replacement motor on ALL Kasco 1/2 HP 115v fountains, aerators, and ?circulators.

	2400VX – Replacement Motor for 2400VFX Display Aerator ships ready to use. ?Comes assembled with a new VFX propeller ?and all ?of the required components already attached to the motor.
	2400S – Replacement Motor for 2400SF xStream Fountain ?ships ready to use. ?Comes assembled ?with a new xStream SF propeller ?and all ?of the required ?components attached to the motor. You will reuse your existing nozzle.
	2400A – Replacement Motor for 2400CF, 2400CUD, 2400CID Circulators all use the same motor. Comes assembled with a new circulator propeller and a protective wire cage. 2400A – Replacement Motor for 2400A, 2400AF Surface Aerators both ?use the same motor. ? Comes ?assembled ?with a new aerator propeller and a protective wire cage.

?

• High-efficiency design means low power compensation and low operating costs
• Heavy-duty motor and corrosion resistant design; suitable for salt-water or other corrosive environments
• An easily replaced protective sacrificial zinc anode included with each unit
• Low maintenance and dependable design
• 2-year warranty

Standard Cord Lengths by Model

• If the existing motor has a ?Quick Disconnect on the cord, order with the “Stub w/Quick Disconnect” Cord Option ?
• 2400VFX Display Aerator – 50 Ft, 100 Ft, 150 Ft w/QD*, 200 Ft w/QD*
• 2400SF Display Aerator – ?50 Ft, 100 Ft, 150 Ft w/QD*, 200 Ft w/QD*
• 2400A/2400AF Surface Aerators – 25 Ft, 50 Ft, 100 Ft, 150 Ft ?w/QD*, 200 Ft w/QD*
• 2400CF/2400CUD/2400CID circulators – ?25 Ft, 50 Ft, 100 Ft, 150 ?w/QD*, 200 Ft w/QD*

* – These Cords come with a factory installed Quick Disconnect. Order the Stub Cord ?w/Quick Disconnect option for these lengths and reuse your existing power cord.

?

SPECIFICATIONS:

?*Cost Per Day is calculated at $0.11 per kilowatt hour. Please note that costs vary by location.

Additional information