Kasco Robust-Aire RA1 Pond Aeration Kit with 1 Diffuser

Description

Robust-Aire RA1 Pond Aeration Kit with 1 Diffuser by Kasco

The NEW Robust-Aire diffuser design uses an easy to assemble, self-weighted, stainless steel base that lands upright every time. ?The built-in strain relief is infinitely easier to use, with no hardware required, while providing the same holding strength. In addition, custom edge guards are included to protect lined ponds. The updated diffuser heads can easily be integrated into older systems with no issue or difference in performance.

Common applications include: backyard ponds & lakes, industrial, mixing, winterkill prevention, waterfowl protection, and more. All Robust-Aire diffused aeration systems are available with an optional remote manifold allowing you to install the compressor up to a mile away from the water’s edge. Additional benefits include:

• No electricity in the water
• Effective in depths 8 ft. -50 ft. (2.5M-15M)
• Compressor can be remotely installed up to 1 mile away (1.6K)
• Backed by a 2 year warranty

?

The ?Kasco Marine RA1 diffused aerator ?will cover any pond up to about 1 to 1.5 acres depending on the depth. ?The compressor can work effectively down to 50′ of depth.

?

Effective aeration can be achieved in 1/4 acre ponds 5 to 8 feet deep, 1/2 acre ponds 8 to 12 feet deep, and 1 to 2 acre ponds 12 to 16+ feet deep.

The 1/4 HP compressor draws 2.5 amps on a 115v set up and 1.2 amps on the optional 230v power supply.

?

Air output is 3.2 CFM’s at 10psi.

?

The Robust-Aire RA1 system: ?

• One KM-60 model ? HP Teich-Aire compressor. Cabinet is optional.
• One, 100 foot roll of 3/8 inch Sure Sink weighted tubing ?
• Robust Aire diffuser assembly

?

MOUNTING OPTIONS:

Mount your Robust-Aire Diffuser system how it best fits your needs. Kasco’s diffuser systems ?work in countless applications, so we’ve designed three distinct mounting methods giving you ?complete flexibility over your design and installation. Choose from the base mount cabinet, the ?post mount cabinet or the no cabinet option.

?

?

Base Mount Cabinet

Can operate 1-6 diffusers 24 in. x 18 in. 20 in. Great choice if the compressor can be on the ground with access to ventilation from below 120-volt receptacle or a 240-volt junction box two cooling fans provide 110 CFM ventilation each 6 ft. power cord from cabinet Powder-coated aluminum for increased durability Compressors are mounted at the factory Acoustical foam included in cabinet to reduce noise levels Cabinet includes keyed lock Nature-green color blends well with outdoor surroundings Note: Place on flat surface to allow ventilation from underneath

?

Post Mount Cabinet

Can operate 1-3 diffusers 19 in. x 12 in. x 12 in. A great choice if compressor needs to be off the ground 120-volt receptacle or a 240-volt junction box Single cooling fan provides 110 CFM of ventilation 6 ft. power cord from the cabinet Powder-coated aluminum features increased durability Compressor is mounted at the factory Acoustical foam included in cabinet to reduce noise levels Cabinet includes a keyed lock for added safety Nature-green color blends well with outdoor surroundings Note: Mount on wall or wooden post (post not included) ?

No Cabinet Option

Cooling fan and universal mounting platform included Allows for easy compressor maintenance 6 ft. power cord from compressor Mount brackets allow for easy installation Must be protected from weather Must still allow for adequate ventilation Least cost option Note: Great flexibility, used in unique applications

?

? ?

Kasco Robust-Aire Systems

OWNERS MANUAL

SPECIFICATIONS SHEET

DIFFUSER ASSEMBLY INSTRUCTIONS MANUAL

PRODUCT FLYER

Additional information