Description
If you’re looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you.
This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You’ll just need to connect everything with the amp kit to add some serious bass to your ride.
- Subwoofer: Polypropylene Cone
- Amplifier: Low Pass Crossover
- Dimensions: 12 1/4″L x 7 1/8″W x 2 1/4″H
Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.
The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.
**We are an authorized MTX dealer!**
- **Subwoofer:**
- MTX TNP212D2 12″ 1200 WATT DUAL Bass Package System
- Box Content:
- 2) MTX Subwoofers
- MTX Subwoofer Box
- MTX Terminator TNA251 Amp
- Subwoofer Enclosure:
- Dual 12″ Loaded Subwoofer Enclosure
- 2) 12″ Terminator Series Subwoofers
- 1200 Watt MAX PAIR
- 600 Watt RMS PAIR
- 2″ Aluminum Voice Coils
- Single 4 Ohm Voice Coils per Sub ( Pre Wired Down to 2 Ohm Load)
- MTX Logo on Dustcap
- Rubber Surround
- Polypropylene Cone
- 48 Oz Magnet (Each)
- Frequency Response : 37 150Hz
- 5/8″ MDF Solid Construction
- Aviation Grade Black Carpet
- “Terminator” Logo In the Carpet
- Dimensions: 13.875″H x 29.625″W x 13.875″ D
- Amplifier:
- Terminator Series TNA251 600 WATT MAX MONO D Car Power Amplifier
- 1 Channel x 500 Watt @ 2 Ohm MAX
- 1 Channel x 250 Watt @ 2 Ohm RMS
- 1 Channel x 150 Watt @ 4 Ohms RMS
- Adaptive D Channel MOSFET Design
- Variable Low Pass 12dB/Octave from 40Hz 400Hz
- Variable High Pass 12dB/Octave from 40Hz 400Hz
- Low Pass Crossover
- Bass Boost
- THD+N (1 Watt) 1%
- Fuse Rating: 30A x 2
- Maximum Input Signal: 6V
- Maximum Sensetivity: 100mV
- Frequency Response: 20Hz 30.000Hz
- Remote Bass Control Included
- CEA 2006 Compliant Amplifier
- 8 Gauge Power/Ground Leads Recommended
- Dimensions: 12 1/4″L x 7 1/8″W x 2 1/4″H
- Product Condition: Brand New
- Part Number: TNP212D2
- 1 Year Manufacturer Warranty
- **Amp Kit:**
- Soundstorm AKS8 Complete 8 Gauge Amplifier Installation Kit
- 20 ft. 8 Gauge Red power cable
- Competition high quality fuse holder
- 1/4″ Gold plated ring terminal
- 3 ft. 8 Gauge Black ground cable
- #10 Gold plated ring terminal
- 16 ft. 18 Gauge Blue turn on wire
- 20 ft. High performance RCA interconnect
- (3) Rubber grommets
- 30 ft. Speaker wire
- 5/16″ Gold plated ring terminal
- 6 ft. Split loom tubing
- (20) 4″ Wire ties
- Product Condition: Brand New
- Part Number: AKS8
- 1 Year Manufacturer Warranty
Reviews
There are no reviews yet.